...

Hot selling SLD-SL-330 30W all in one solar street light

This compact, unique, easy to install with a pole, post, or wall-mounted. Automatically illuminates at dusk at 33% brightness and reverts to 100% brightness when motion is detected. It consists of a discrete solar panel installed on the top of the fixture, with a lithium battery installed inside, and a high-quality SMD/LEDs on the underside of the unit. Also on the underside of the light is a motion sensor. When it detects activity within the light switches to full brightness mode and when the area is free of activity it will revert back to its ambient mode at approximately 1/3rd power.

Additional information

Model No

SLD-SL-330

Battery Type

LiFePO4 battery

Power of PV module

50W

Working Time

12hours lighting time per night

Lumen output

3000-4000lm

Color Temperature

CW 5500K, NW 4000K, WW 3000K

Product Details:

The hot selling all in one solar street light SLD-SL-330 30W

Here we would recommend you our integrated solar led street light, 30 Watt (3300-3600 Lumen ) LED lamps,they all use have very super bright Cree chip be light source,reach to 120-130lm/watt.We sell these models as a complete lighting system.

This compact, unique, easy to install with pole, post or wall mounted. Automatically illuminates at dusk at 33% brightness and reverts to 100% brightness when motion is detected.. It consists of a discrete solar panel installed on the top on the fixture, with a lithium battery installed inside, and a high quality SMD/LEDs on the under-side of the unit. Also on the under-side of the light is a motion sensor. When it detects activity within the light switches to full brightness mode and when the area is free of activity it will revert back to its ambient mode at approximately 1/3rd power.

This all in one light fixture may be a good choice for windy locations based on is compact design. The large version with its 1350/2400 Lumen output makes it the most powerful LED motion detector light on the market .They are suitable for streets,parks,gardens,yard and squres and so on.

2016 hot selling all in one solar street light SLD-SL-325 25Wis worthy of the name.They are sell well at home and abroad.What are you waiting for,just contact us to order.

Product Data

 

Model: SLD-SL-325  SLD-SL-330 SLD-SL-340
Solar Panel Max Power: 18V/50W  (high efficiency imported silicon solar   cell) 18V/60W  (high efficiency imported silicon solar   cell) 18V/60W  (high efficiency imported silicon solar   cell)
Solar Panel Life Time 25   years
Battery Type lithium   battery(Life time 5 years)
Battery Capacity 12.8V   21AH  12.8V 24AH 12.8V   27AH
LED Max Power 25W 30W  40W
Led Chip Brand CREE   from U.S.A with high brightness
Lumen (LM) 3000-3200lm 3300-3600lm 4800-5200lm
LED Life Time 50000hours
Lighting Viewing Angle 90°×126°
Charge Time(by sun): 6-7hours   (with enough strong shine)
Discharge Time more   than 20 hours (saving mode)
Working TEMP( ℃ )  -20~+60
CCT (k) 5500k-6000k
Mounting Height(m): 5-6m 6-7m 7-8m
Space between   light(m): 15-20m
Lamps Material aluminium   alloy
Certificate: ISO/CE   / ROHS / IP65
Warranty Period: 3years

The design drawing of cree solar led street light:

The illumination data of integrated solar led street light:

Performance

All-in-one design.
Weather rating is I.P. 65
Ideal operating temperature charging range is 0 deg C. to +60 deg C. (-32 deg F. to +140 deg F.).
Ideal operating temperature discharging range is -20 deg C. to +60 deg C. (-4 deg F. to +140 deg F.).
Ideal storage temperature range is 0 deg C. to +45 deg C. (-32 deg F. to +113 deg F.).
Anti-tamper (theft resistant) stainless steel hardware included for pole clamp.
Anti-tamper bolt install/release tool included.

Light Fixture

A passive infra-red motion sensor is built into the fixture on all models.
The detection range will vary depending upon a few factors including fixture mounting height, local ambient temperature etc.
All the lights can illuminate continuously for up to 24 hours in ambient mode or up to 12 hours in full brightness mode.
All SMD/LED’s have a color temperature of 6000-6500k.
Zero light pollution.
The 25w lamp’s pole would be 5-6meters,the distance of pole would be 15-20meters,and the lighting area is 16*7meters.
The 30w lamp would match with 6-7meters pole,the distance between of two pole would be 20-25meters,and the lighting area is 24*10meters around.
As for 40w lamp,it suitable for 7-8meters pole,the distance between of two pole we would suggest 20-25meters ,and the lighting area is 27*11meters.

Features & Advantages

Features:
1.Patent pending integrated design,solar powered outdoor lighting•Easy installation. No cable needed.
2.Using LifePO4 battery to prolong product life and protect environment.
3.Light output can be adjusted automatically by a built-in infrared sensor, pedestrians closing light working bright model, after leaving from the effective sensor area, bright model will last for one minute, and then become dim model.
4.Modularity design. Easy assemble and maintenance.
5.Compact volume and light weight design saves freight cost and installation cost
6.Rust-proof, dustproof and waterproof.
7.Three years warranty for our led solar motion light.

Advantages:
1. Integration design, easy to carry, put solar panel, LED lamp, battery and controller all in one, don’t need any cable,;
2. Installation is very convenient, use iron pole, wood pole, bamboo pole, plastic pole, wall, etc will be no problem, it will can reduce a lot of cost;
3. Using high capacity and long life of lithium iron phosphate battery,service life 5 years, can resist high temperature  and low temperature, can ensure the long service life of the whole product;
4. Easy to maintain, the battery and light are the direct inserted & pluck type, can complete the main maintain by yourself in the future when  the battery or light source need to be replaced, don’t need a professional personage to do maintenance.
5.Integrated solar street light  equipped a infrared motion sensor to intelligently control the brightness,  when the passerby close to the light , it work in full power mode ,the lamp become bright , after leaving ,the lamp become half power working mode , the lamp become dim ,  so that to saving energy
6. Use alloy materials, waterproof, strong and durable.
7. With CE, ROHS and IP65 certificate for our led street solar light.

Working Mode

The working model of 25W 30W 40W SMD all in one soalr street lgiht:
The solar panel converts turns sunlight into electricity and stored in Li-Fe battery via controller.The COB LED light will work at night automatically under the light sensor control,and provide light for different areas.The LED light will be at saving energy mode(about 30% of full power) normally when there is no motion.However,it will be switched to full power mode when PIR sensor detects motion.The full power mode will last about 30s ,and after 30s it will be switch back to saving power mode until new motion detected.It can be also pre-programmed by time schedule without motion sensor as well.That would the be firt one hour at 30% illumination,second 4 hours at full brightness,and the rest hours(befor the sun rise) at 30% illumination.

Installation

Install fuse first if present before use (remove any film under fuse)
Tool supplied to tighten security bolts provided
Face solar panel as much towards the north as possible to maximize sun exposure (and therefore battery charge.)
Please turn on the switch before using.
The trees around the solar lamps shall not affect the lighting of the lamps, otherwise, prune the trees.
It is strongly recommended not to set high and large shelters in front of lamps to avoid the sunlight.

 

Product Details

DETALI 1
EXCELLENT LED CHIP
Imported LED chip,less heat dissipation,excellent performance

DETAIL 2
HIGH QUALITY ALLUMINUM ALLOY
Durable aluminum,power coated.It is easy for installing,anti-corrosion,rust prevention.

DETAIL 3
SOLAR ENERGY
The solar panel turns the solar energy into DC electricity in battery during the day time,and when the night comes,the battery will light up the lamps.

DETAIL 4
HUMAN BODY SENSOR
Human body sensor will detect the passagers,when passagers walk away from the lamp,after 1 mins,the lamp will turn to dim mode.And when another passager walking by,it will automatically turns bright mode again.In that way,we save energy perfectly.

 

Packing Details

100% TEST
Every lamp is 100% test before delivery,in that way,the repair rate is rapidly reduced.

Carefully Packing
Every solar pv led street light was carefully sealed with film paper,in order to protect form dust and humidity.

Professional Packing
Every lamp is packed by professional packing team.The carton box is special design for integrated solar street light.

More packing details of integrated solar led street light please check the below picture and table:

Model: SLD-SL-325  SLD-SL-330 SLD-SL-340
Unit Size: 960*360*43mm 1170*360*43mm
N.W: 16.5kg 20.5kg 22.5 kg
Inner Box: /
Carton Size: 1010*410*210   mm 1225*420*210 mm
Q’ty/ctn: 1set/ctn
GW.for Carton: 17.8   kg 21.8kg 23.8 kg
20GP Container: 310   set 255 set
40GP Container: 610   set 530 set

Thanks for your reading of our integrated solar led street light,and any question of our company or products would be warmly welcomed.

Send Inquiry

Ask For A Quick Quote

 Any requests or questions about products or others are welcome. Our experienced consultants will contact you in 12hours and help you with price and shipping calculations, and they can also work out a lighting solution for you.

wrapped solar pole street light in dubai

Download Our Full Catalogue

Be the first to know about new products!